We have many jacking and skating systems developed to meet individual requirements

We have designed, built and used specialized jigs to remove armatures.

We use low pressure hydraulics on our jacking and skating systems and unique imported plastic jacking blocks to reduce hazards.

 jacking2

Hits: 9691

RJA loaded the Co2 Pressure Vessels directly from the ship hooks onsite at the Port of Brisbane; loaded onto the 14 x 8 platform trailer to accommodate 130T, 30m long x 4.5m Diameter Co2 Vessel to be delivered to Gibson Island Qld.

The vessels were then placed on beams and stands until time of delivery.

Each of the 2 loads were under escort, 2 x Qld Police cars & 4 x Pilot vehicles to ensure safe passage of the 2 Prime Movers pulling the platform trailer through the suburban streets to its destination.

Hits: 154

September 2021, our team made the 5 day, 1,200km Journey from Collinsville Qld to Kumbarilla Park Qld, transporting a Large Power Transformer (LPT).

When transporting an LPT, there are requirements that need to be met, obtaining permits & submitting routes for approval from the governing body of the roads in that state. Obtaining these permits requires infrastructure inspections of bridges & other obstacles along the way.In this case RJA had to obey bridge compliances of only 2 trucks to be hooked to the load whilst crossing, to ensure the load fell within the weight compliance of these specified structures.

Hits: 158

Lachlan’s Line Pedestrian Bridge is the first of its kind in Australia, embracing an organic Double Helix design. Traversing 170m over the M2 & Delhi Road, connecting Macquarie Park & North Ryde station.

The Helix design varies in diameter the smallest being 5.5m to the widest point of 7.8m wide. It comprises of more than 3,600 unique steel plates.

Rex J Andrews Pty Ltd was commissioned to transport the segments of bridge by long-time client S&L, transporting the four segments from their temporary work site.

Hits: 150

The Big Merino "Rambo" is located at Goulburn NSW, the 15m high 97T concrete and steel structure was built in 1985 800 metres from where it is now at the southern freeway exit

Rex J Andrews took on the task of mustering Rambo to his new paddock on 26th May 2007. The scope included the removal of the existing columns to allow access for the transporter, Self loading of the structure, transport and alignment with the new foundations.

 

IMG 4812

Hits: 13545

This project required the movement of one furnace module from Webb Dock, Melbourne to Coolaroo Melbourne, a distance of only 30km. The method chosen was to use the bookend method with purpose built bookends, this allowed the furnace to travel as close to the ground as possible, maximising the furnaces dimensions and volume. After 6 months of preperations the furnace was moved over two nights to its final location.web0287

Hits: 6713

Sydney
PO Box 271, Penrith NSW Australia 2751
32-36 Lugard St Penrith NSW 2750
Ph: 02 4721 7633
Em: sydney@rja.com.au

Adelaide
PO Box 6072, Burton SA 5110
103-105 Helps Rd Burton SA 5110
Ph: 08 8280 5541
Em: adelaide@rja.com.au

Newcastle
Po Box 271 Penrith NSW 2751
16 Yilen Place, Beresfield NSW 2322
Ph: 02 4721 7633
Em: newcastle@rja.com.au

Portland 
PO Box 271, Penrith NSW Australia 2751
219 Portland-Nelson Rd, Portland VIC
Ph: 02 4721 7633
Em: sydney@rja.com.au

Rex J Andrews reserves the right to alter this information at any time

Rex J Andrews Pty Ltd makes no warranties, expressed or implied, in relation to the information contained in www.rja.com.au, including but not limited to warranties relating to the accuracy, completeness or applicability of the information, and excludes all liability for any damage, whether direct, indirect, special or consequential, arising in any way out of the use or misuse of the information.

© 2021 Rex J Andrews Pty Ltd.           Back to Top